sábado, 25 de junio de 2016

THAAD seen as capable of intercepting N.K. mid-range missile


The advanced U.S. missile defense system THAAD is believed to be capable of intercepting North Korea's intermediate-range ballistic missiles if it is deployed in South Korea, Seoul's defense chief said Friday.


North Korea claimed Thursday that it has succeeded in test-firing its mid-range missile, boasting of its capacity to hit U.S. forces in the Pacific region. "The deployment of THAAD will help South Korea's move to counter the North's missile threats," Defense Minister Han Min-koo told reporters.



The minister said that more information is needed to check THAAD's capability to intercept the North's mid-range missiles, but generally, the system is believed to be up to the task. Seoul and Washington have been discussing the potential deployment of the Terminal High-Altitude Area Defense battery in South Korea, where about 28,500 American troops are stationed.


The allies' move is aimed at countering the North's evolving missile threats amid concerns about the technical progress of North Korea's nuclear and missile programs. On Wednesday, the North fired off what is believed to be two Musudan mid-range missiles, marking its fifth and sixth launches since April. The Musudan missile, with an estimated range of some 3,000 to 4,000 kilometers, could theoretically reach any target in Japan and fly as far as the U.S. territory of Guam.


The North's first five attempts to test-fire the missile failed, but the sixth one flew about 400 kilometers after being launched at a higher angle Wednesday. The North's latest move raises concerns about advances made in the country's nuclear and missile capabilities. Pyongyang is seeking to develop a nuclear-tipped intercontinental ballistic missile capable of hitting targets on the U.S. mainland. South Korea's military said that it is too early to conclude the North's test was a total success, but experts said that if the North did not launch the missile at a higher angle, it could have traversed on a normal trajectory.


Han said that North Korea could test-fire an ICBM or a submarine-launched missile in a bid to show off its military prowess. "We do not rule out the possibility of an additional nuclear test by North Korea," he said. South Korea is speeding up the development of the indigenous Korea Air and Missile Defense system. A pre-emptive missile destruction system, the so-called Kill Chain, is also under development to detect and strike North Korea's missile and nuclear facilities. The North conducted its fourth nuke test in January and launched a long-range rocket in the following month, drawing international condemnation. The country is banned from using ballistic missile technology under relevant U.N. Security Council resolutions.

¿Why Japan is wary of North Korea's Musudan missiles?


North Korea has recently claimed a series of breakthroughs in its push to build a long-range nuclear missile that can strike the American mainland. If the North's claims about the sixth Musudan launch are true, it would pose a threat to the USA military base in Guam, where troops that would be sent to the Korean Peninsula if conflict broke out are based, and also possibly a nuclear threat. It explains in part North Korea's tenacious testing of the Musudan missile. (Read more)

N. Korean Official: Nuke Tests, Missile Launches to Continue


North Korean leader Kim Jong Un said after supervising Wednesday's launches that the country now had the capability to attack USA interests in the Pacific, official media reported. (Read more)

Putin Praises 'All-Embracing' Partnership of Russia, China


Russian President Vladimir Putin on Saturday emphasized economic ties with China and praised what he called Russia's "all-embracing and strategic partnership" with its neighbor, during a visit to Beijing that takes place against the background of a drop in trade and lingering mistrust. While ambitious hopes for closer economic cooperation haven't materialized, Russia and China have bolstered their military ties, which have included joint war games and contacts on missile defense. (Read more...)

Russia to deploy Iskander missiles in Europe


According to the country's official and former Black Sea fleet chief Vladimir Komoyedov, Moscow is planning to send its nuclear capable Iskander missile systems to Kaliningrad. "Kaliningrad is our frontline in the west, the main base of the Baltic fleet, which is pressured by the NATO states from all sides. Our plans to deploy the Iskander systems there have been announced several times", Komoyedov said in an interview with Interfax, according to Deutsche Welle. These missile systems are capable of hitting targets located 500 kilometres away from the launch site. (Read more)




domingo, 24 de abril de 2016

Emerging Technologies, Emerging Surprises...



Today, the world may face some surprises due a number of emerging technological advances that could significantly lower the barriers to the development of nuclear arms.

In particular, additive manufacturing of machine parts, such as those needed for uranium-enrichment centrifuges and missile engines—and the use of lasers to enrich uranium may create new pathways to more-rapid development of nuclear weapons and the systems necessary for their delivery.

It may only be a few years, if that, before additive manufacturing is widely adopted. Although laser enrichment has not been commercialized, it may be adapted before long for enriching uranium on the smaller scale needed for a nuclear weapons program.

miércoles, 30 de marzo de 2016

Additive Manufacturing for the US Navy’s Fleet Ballistic Missile program


With many of the companies that are designing and manufacturing weapons for the military using more and more Additive Manufacturing (AM) systems in their workflow, it was only a matter of time until 3D printed components made their way into arms and weapons.


Of course all we know that NASA and the US military have used 3D printed components to successfully test advanced prototype airplanes, spacecraft and even ground vehicles... But there aren't many more mission- and life-critical systems than a submarined nuclear ballistic missile.


This week, for the first time, a 3D printed component was used in a test flight for the new, high-tech upgrade to the US Navy’s Fleet Ballistic Missile program.  The component was designed and fabricated entirely using 3D design and 3D printing, a process that allowed Lockheed Martin engineers to produce the part in half the time it would take traditional methods.

domingo, 14 de febrero de 2016

Additive Manufacturing: "Imagine the Possibilities"


Additive Manufacturing allows engineers to create complex geometries out of polymers, metals, and composites that are not possible through traditional manufacturing techniques.


Logisticians are seriously looking at Additive Manufacturing, which promises to allow the military to print parts in-theatre, significantly reducing the burden on the supply chain.


Rear Admiral Vincent Griffith, Director of DLA Logistics Operations at the Defense Logistics Agency is excited about the possibilities additive manufacturing offers: “One area that strikes a chord with DLA is 3D printing, because of the potential additive manufacturing has for helping us obtain obsolete and hard-to-source parts for the more than 2,400 weapon systems we support. Additive manufacturing is a fairly new concept, but we’re thinking big. We want to expand our additive manufacturing parts catalog for integration into the supply system; produce approved critical safety item parts; establish and maintain a parts-on-demand capability; and have a library of Technical Data Packages with 3D models to enable faster production.”

miércoles, 10 de febrero de 2016

El Grupo Integral abre centro de Manufactura Aditiva en Barcelona

El Grupo Integral abre un centro de Manufactura Aditiva en Barcelona


Mañana Jueves 11 de febrero el Grupo Integral Innovation Solutions abre al público su nuevo centro de Manufactura Aditiva, ubicado en un nuevo local anexo a sus oficinas centrales de Barcelona ( Plaza de Josep Pallach nº 4 ). Durante la jornada inaugural se ofrecerán ponencias en las que se analizará el estado actual de la manufactura aditiva, y se podrán ver trabajando diversas impresoras 3D y sistemas de producción 3D.

Más información: http://integralplm.com/es/empresa/showroom-impresion-3d/

lunes, 4 de enero de 2016

China: Rail-Mobile ICBM DF-41 Test


China’s Defense Ministry confirmed on Thursday 31th that its military recently conducted a test of a new rail-mobile ICBM capable of hitting any part of the United States with up to 10 nuclear warheads.


With a believed top speed of 30.000 Km/H and a range of up to 12.000 Km, the DF-41 competes directly with the US LGM-30 Minuteman which has a reported range of 13.000 km and a top speed of 24.000 Km/H.